R22-1 PRO-manufacture,factory,supplier from China

1 Ton Mini Excavator Ship to US DistributorsRippa Group always adheres to product innovation and quality control. Every mini excavator will undergo strict quality inspection before leaving the factory, and is responsible for every dealer and consumer.Rigorous attitude has won the recognition of all dealers and helped dealers to open up the local market.If you also want to open up the market with the mini excavator of Lipai Group, please contact us now!

The weight of small excavators varies relying on the model,usually between one thousand and ten thousand pounds.1、The weight of a small excavatorA small excavator refers to an excavator with a working weight between 1 ton and 6 tons.Specifically,depending on the model,the weight of a small excavator is about a thousand to ten thousand pounds.Among them,a 1-ton excavator weighs about 2000 kilograms,and a 4-ton excavator weighs about 8000 kilograms.2、Factors affecting the weight of small excavatorsThe weight of a small ex

1. Daily maintenance:Check whether the lubricating oil, coolant and fluid levels are normal before and after use, and add or replace them in time.Clean the external surfaces of the excavator, including connecting rods, tires and body, and remove dust and mud in time.Clean the air filter and oil filter to make sure they are clear.Check tire inflation pressure and maintain correct inflation.Check and maintain good battery condition and clean battery connectors.2.

1. The impact of diesel quality on excavator enginesThe quality of diesel directly affects the normal operation, operating efficiency and service life of excavator engines. If inferior diesel is used, the following problems may occur:Incomplete combustion: Impurities in inferior diesel will cause incomplete combustion and increase carbon deposits.

1. Heating the engine: At low temperatures, the cold start of the engine may be affected. Before using the excavator, especially on cold mornings, the engine should be heated in advance. An electric heater or other heating device can be used to warm the engine in advance, which can improve the reliability and efficiency of starting.2. Check the antifreeze: Make sure the antifreeze concentration in the engine cooling system is appropriate. The higher the concentration of antifreeze, the stronger the cold resistance.

Chinese excavator manufacturers have been continuously investing in technology upgrades and quality control to improve product quality and efficiency. The main reasons why Chinese excavators are relatively cheap are the following factors:1. Production economies of scale: China has a huge population and industrial base, which allows excavator manufacturers to enjoy the cost advantages brought by economies of scale and reduce production costs.2. Low labor costs: Compared with many developed countries, China’s labor costs are low, which also helps reduce the production cost of excavators.3.

Although the size of the small excavator looks small, don't underestimate it. This equipment can do a lot of work that the large excavator equipment can't do. Small excavators are small in size and low in initial investment costs. They are widely used in urban building decoration, agricultural gardens, etc., and are a small-scale engineering operation. Below are the engineering fields where the mini excavator is applied.1. Municipal engineering field: In municipal construction, it is essential to dig ditches and bury underground pipelines.

Small multifunctional snow removal machine in operation also need to pay attention to some matters, the specific matters are as follows.    1, check whether there are loose parts or oil leaks, open the snowplow before repair.    2, first open the snowplow, make it idle for 2 minutes, so that the engine warm up.    3、Prohibit the implementation of any maintenance in the process of using the snowplow.    4、Please keep your body away from dangerous parts and make sure the snow raising opening is clear.    5、When crossing the road or walking on the

Full-size excavators cost between $80,000 and $500,000, while smaller excavators with working weights under 10 tons cost between $10,000 and $50,000. Demolition excavators, which are also large excavators commonly found in fields such as mining, can sell for over $400,000 ExcavatorOperating WeightPriceMiniUnder 10t$10,000 ~ $50,000Full Size10t～50t$50,000 ~ $300,000LargeMore Than 50tOver $400,000Compared with other brands of excavators, what are the advantages of Lipai excavators?1.

Because of the forte of the small excavator’s workplace environment, it must be fantastically valued in day by day maintenance. When it comes to the protection of the hydraulic cylinder of the excavator, I assume it is clear to all and sundry that the motive of its provider is that the tools oil is uncovered to environmental pollution. The particular measures are as follows:1.